Secrets Of Mobiles

swati16

Member
Secrets Of Mobiles
How To Charge A Mobile With Out A Charger??


Its true..
Just switch off Ur mobile, Remove battery, Fold a paper and keep it in such a way that it hides the center pin of the phone and then put the battery in. Now switch on. the display will say insert sim, next it will restart, then U pull the paper in the center pin..
HURRAY
Now the charge is full....

TRY IT AND LET ME KNOW THE RESULTS......


Nokia Codes ( important )

Nokia Codes Tips and Tricks

To check the IMEI (International Mobile Equipment Identity) Type-*#06#
Information you get from the IMEI-
XX X
TAC FAC SNR SP


TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare
To check the phones Software revision type-*#0000#
Information you get from the Software revision-
V 05.31
18-02-99
NSE-3

1ST Line = Software revision

2ND Line = The date of the software release

3RD Line = Phone type
To enter the service menu type-*#92702689# (*#WAR0ANTY# )

Serial number (IMEI)

Production date (MM/YY)

Purchase date (MM/YY) You can only enter the date once.

Date of last repair (0000=No repair)

Transfer user data to another Nokia phone via Infra-Red
Clock StoppingTo check weather your SIM Card supports clock stopping type-
*#746025625# (*#SIM0CLOCK# )

Revealing the Headphone and Car-Kit menusPlease note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.
2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICKThis should work on all software versions of the 6110.
1. Go to the Calendar (Menu-Cool
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold "Clear" until the whole text is cleared, then press "Back".
5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITYTo activate EFR (Enhanced Full Rate) Enter the code-
*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-
#3370#

THE JAMES BOND TRICKIf you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITORThere is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
1.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2.
Take apart the phone.
3.
De-solder the EEPROM (ATMEL AT 24C64).
4.
Read out the data with an EEPROM programmer and save it to a file (Backup).
5.
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6.
If you have v5.24 then change the address "0378" from "00" to "FF".
7.
Write the new data to the EEPROM and solder it back to the phone,
8.
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information.


Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level

C1 (Path loss criterion, used for cell selection and reselection) . The range is -99 to 99.

RTL (Radio link timeout).

Timeslot

Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

Discard cell barred information

CHECK SIM-LOCKNote - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.

COUNTRY-LOCK

NETWORK-LOCK

PROVIDER-LOCK

SIMCARD-LOCKThe code to read out the sim-lock status of your phone is

#PW+(MASTERCODE) +(Y)#

# = DOUBLE-CROSS

W = PRESS "*" THREE TIMES

P = PRESS "*" FOUR TIMES

+ = PRESS "*" TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!
"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS

#PW+1234567890+ 1# = GIVES PROVIDER-LOCK STATUS

#PW+1234567890+ 2# = GIVES NETWORK-LOCK STATUS

#PW+1234567890+ 3# = GIVES COUNTRY-LOCK STATUS

#PW+1234567890+ 4# = GIVES SIM-CARD-LOCK STATUS.


Check The Quality Of Your Mobile



Press the following on your mobile *#06#. The-international mobile equipment identity number appears


IF the digit number Seven & Eight is 02 or 20 that mean it was assembled in the Emirates which is very Bad quality

IF the digit number Seven & Eight is 08 or 80 that mean s it was manufactured in Germany which is not bad

IF the digit number Seven & Eight is 01 or 10 that mean it's manufactured in Finland which is Good

IF the digit number Seven & Eight is 00 that means it was manufactured in original factory which is the best Mobile Quality ....

IF the digit number Seven & Eight is 13 that means it was assembled in Azerbaijan which is very poor quality and potentially very dangerous to your health!!!


Replies are invited as an encouragement for further postings . .


Mobile Secret Codes **Nokia**


CODE
*3370#

This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
CODE
#3370#

Deactivate Enhanced Full Rate Codec (EFR)

CODE
*#4720#

Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
CODE
*#4720#

With this Nokia code you can deactivate the Half Rate Codec
CODE
*#0000#

Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
CODE
*#9999#

QUOTE
Phones software version if *#0000# does not work
CODE
*#06#

For checking the International Mobile Equipment Identity (IMEI Number)
CODE
#pw+1234567890+1#

Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
CODE
#pw+1234567890+2#

Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
CODE
#pw+1234567890+3#

Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
CODE
#pw+1234567890+4#

SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
CODE
*#147#

This lets you know who called you last (Only vodofone)
CODE
*#1471#

Last call (Only vodofone)
CODE
*#21#

This phone code allows you to check the number that "All Calls" are diverted to

CODE
*#2640#

Displays phone security code in use
CODE
*#30#

Lets you see the private number
CODE
*#43#

Allows you to check the "Call Waiting" status of your cell phone
CODE
*#61#

Allows you to check the number that "On No Reply" calls are diverted to
CODE
*#62#

Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
CODE
*#67#

Allows you to check the number that "On Busy Calls" are diverted to
CODE
*#67705646#

Phone code that removes operator logo on 3310 & 3330
CODE
*#73#

Reset phone timers and game scores
CODE
*#746025625#

Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
CODE
*#7760#

Manufactures code
CODE
*#7780#

Restore factory setting
*
CODE
#8110#

Software version for the nokia 8110
CODE
*#92702689#

Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
CODE
*#94870345123456789#

Deactivate the PWM-Mem
CODE
**21*number#

Turn on "All Calls" diverting to the phone number entered
CODE
**61*number#

Turn on "No Reply" diverting to the phone number entered
Turn on "On Busy" diverting to the phone number entered
CODE
12345

This is the default security code
CODE
Press and hold #

Lets you switch between lines
CODE
Service Provider Lock Information


Service Provider Lock Service Provider lock is the lock to your phone which is implement by your service provider e.g. Orange onto your sim card. The phone is usually locked to a certain SP but it can be unlocked allowing you access to other service providers that provide a better deal. The same effect can also be used by using a Dual sim, you could have two sim cards in one phone allowing you to switch between sims and SP 1. First sim = Orange 2. Second sim = One2One

CODE
Short Message Serivce Centre Numbers ( FREE SMS )

SMSC (Short Message Serivce Centre Numbers) SMS Centre number allow you to send free sms, by changing your message centre number like this:
1. Go to messages
2. Message Settings
3. Set 1
4. Message Centre Number
5. Then change the number to one from SMSC Number section (from SMSC #'s given below)

CODE
What does this do?


Instead of paying for your messages, you can alter a number in your phone to send to a different centre. This cannot charge you, and consequently you have free SMS!
CODE
How does it work?


When you send a text message, it is first transmitted to your network's routing centre, called the Short Message Service Centre, or SMSC. This SMSC is generally a telephone number, normally a memorable one- i.e. Orange's is 0973 100973. Here, it is sent to the recipient's network's SMSC, where it is then forwarded to their phone. The whole process takes only seconds, but the vital part is when it reaches your SMSC, because then it is forwarded, and you are charged according to your tariff. If you, however, change your SMSC number to one below, the network who forward the message will not know who you are, and consequently cannot charge you. Clever huh?
CODE
Does it always work?


No! It can take hours to find a number that hasn't been blocked by your network- they usually carry out checks monthly and bar any numbers known to be forwarding SMS. Also, I understand that Orange and all networks in Denmark have barred all numbers aside from their own- so it won't work with Orange or Danish networks.
CODE
ISDN Number

ISDN number For checking ISDN number enter *#92772689#
Warranty Menu To view the warranty menu enter *#92702689# [*#war0anty#]
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes you capebel of transferring user data if you have the gear for it
6) shows how many houres the phone has been on Warranty
Menu To view Warranty menu enter *#92702689# [*#war0anty#] Phone asks 'warranty code:' Press the following warranty code: 6232 (OK) : Displays the Month and Year of Manufacture (MMYY)
7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED'...) 7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another eg. if broken (via IRport.)
Sim Clock Stop :-
To view if sim clock can be stoped enter *#746025625# [*#sim0clock#] (Sim-clock-stop is a kind of standby mode which will save battery time) May not work with all firmware versions.
CODE
Imei Code


To View IMEI (International Mobile Equipment Identity) enter *#06# Firmware Versions
Check To view the Firmware version enter *#170602112302#
CODE
Restore Factory Settings


To restore factory settings (Memory, language, counters not included) enter *#7780#
Manufacturer Information To view Week and Year of manufactureenter *#3283# [*# D A T E #] The last two digits are the year. If the year is 95, the first two digits are the month. For 96 the first two digits are the week of the year.
QUOTE
Firmware Version


To view the firmware version enter *#170602112302# or *#9999# On newer phones, the code has been changed to *#682371158412125#


Mobile Phone Secrets & Tricks

.:: NOKIA ::. Nokia Universal Codes Code Description :
These Nokia codes will work on most Nokia Mobile Phones

(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talktime is reduced my approx. 5%

(2)#3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )

(3)*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

(4)*#4720# Deactivate Half Rate Codec.

(5)*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )

(6)*#9999# Phones software version if *#0000# does not work.

(7)*#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

(#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(9)#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(10)#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(11)#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(12)*#147# (vodafone) this lets you know who called you last.

(13)*#1471# Last call (Only vodofone).

(14)*#21# Allows you to check the number that "All Calls" are diverted to

(15)*#2640# Displays security code in use.

(16)*#30# Lets you see the private number.

(17)*#43# Allows you to check the "Call Waiting" status of your phone.

(1*#61# Allows you to check the number that "On No Reply" calls are diverted to.

(19)*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls
are diverted to.

(20)*#67# Allows you to check the number that "On Busy Calls" are diverted to.

(21)*#67705646# Removes operator logo on 3310 & 3330.

(22)*#73# Reset phone timers and game scores.

(23)*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

(24) *#7760# Manufactures code.

(25)*#7780# Restore factory settings.

(26)*#8110# Software version for the nokia 8110.

(27)*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favourite )

(2*#94870345123456789# Deactivate the PWM-Mem.

(29)**21*number# Turn on "All Calls" diverting to the phone number entered.

(30)**61*number# Turn on "No Reply" diverting to the phone number entered.

(31)**67*number# Turn on "On Busy" diverting to the phone number entered.

(32)12345 This is the default security code.

press and hold # Lets you switch between lines NOKIA 5110/5120/5130/5190 IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4 NOKIA 6110/6120/6130/6150/6190 IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 # NOKIA 3110 IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 # NOKIA 3330 *#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you'll be presented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours,
ask your local dealer for it.
Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689# .:: Ericsson ::. Ericson T65 *#05# Fake Insert puk screen Press no to exit Ericsson T20
Ericsson T20

MENU tecnichal Info
[type] >*<<*<* Displays :
1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup

2] Service setup
1] Contrast 3]Service Test
1] Display
2]Leds
3]Keyboard
4] ringer
5] Vibration
6]Headset
7] Microphone
8]Clock
4] Names List
MENU info
[Type] >*<<**<
Network and Subnetwork : NCK and NSCK Ericsson T28 >*<<*<* menu Tecnichal info
SW vers. and name list
>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
< and > are the right and left menu's keys Ericsson T18s/T10/A1018s >*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
< and > are the right and left menu's keys
!!!><**
Control /Enable SIM Lock!!! Ericsson R310 Technical Info : >*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration 2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock
3)Text's name List
Info personal : >*<<**< SIM Locking ( 8 digits' code ) ( it could harm your phone )
1) Network
2) Subnetwork
3) SP
4) Corporate
.:: Siemens ::. Siemens C25 IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1 .:: Bosch ::. IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 # .::Alcatel ::. IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 * .:: Samsung ::. Samsung SGH600/2100DB IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842# .:: Dancall ::. IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # .:: Philips ::. *#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info. .:: Panasonic ::. Panasonic gd90 gd93 *#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu " Panasonic gd70 *#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu " .:: Acer ::. Acer V 750 *#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ] .:: Genie ::. Genie DB *#06# IMEI.
*#2254*# Near Cell Mode. For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info. .:: NEC ::. NEC db2000 *#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n[FONT=&quot]�[/FONT] 8 cifre]
( it could harm your phone ) .:: Trium ::. Trium Geo/Geo @ - Astral - Cosmo -Aria Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage

Trium Galaxy
Push * and type 5806: Production date and SW version .:: Telit ::. Telit GM 810 MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature .:: Sagem ::. Sagem MC959/940 Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration Sagem MC920 Select commands' menu and push *
Displays 5 new menus : 1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )
.:: Sony ::. Sony CMD Z5/J5 Vers. SW :
Without SIM , switch on phone and type l *#7353273# .:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version .:: Motorola ::. Motorola V3688 IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK .:: Tips and Tricks ::. Send an E-mail from your GSM From your telephone you can send an email to whichever E-mail customer of the Internet network. The e-mail will be sent to the maximum of within an hour from the reception.
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code). FAC = Final Assembly Code (For Nokia phonfiltered=10).
SNR = Serial Number. SP = Spare (always SP=0).
To check the phone's software (firmware revision information) type: *#0000# ( or for some phones outher then Nokia 61XX you can try *#model nummber# ex. for 8110 *#8110#) Information you can get from the phone's software version:
V 3.14
28-11-97
NSE-3
1st line: Software version.
2nd line: The date of the software release.
3nd line: Phone type, .

Some versions and dates: V 3.14 28/11/97
V4.33 11/03/98 V 4.73 22/04/98
V 5.24 14/9/98 Pin-Out Diagram for the 6110 1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND Revealing Headphone and Car-Kit Menus Think about this: If you do these tricks the new menus can not be erased after the procedure. But it's not dangerous or harmful for your phone To enable the headset-function, you have to short-circuit the "3" and "4". After a short time there is "Headset" on the display Now, menu 3-6 is now enabled!
To enable the carkit-function you have to short-circuit the "4" and "5". After a short time, "Car" is shown on the display and the menu 3-7 is enabled!! This Trick is for you how want to hear more then your supposed to ! If you short-circuit the left and the right contact with the middle contact ("3", "6" and "9") the Nokia Software hangs! The profile "Headset" will be activated. Before you do this, just active the "auto call receive" function in the headphone profile and set the ringing volume to "mute" Now you can use your phone for checking out what people are talking about in a room. Place the phone somewhere stratidic and call your phone! The phone receives the call without ringing and you can listen to what people are talking about! .....gr8... Serial numbers on your 6110 For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date 0298
Then there is the last Repair Date: ex. Repaired: 0000 Note: you must turn off the phone to exit after this test, because of the last function, "transfer user data" which doesn't work as "standard"....You can use this mode only to transfer all Calender, Profile and Callers Group Information to another phone (eg. if you are replacing phone or configuring phones for use within your company or when a particular phone doesn't works correctly )
Activating and deactivating EFR and HFR, on your 6110 *3370# to activate Enhanced Full Rate - Makes calls sound better, but decreases the battery life by about 5%. #3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery life by about 30%. #4720# to deactivate Half Rate Mode


10 things you don't know about NOKIA

1) The ringtone "Nokia tune" is actually based on a 19th century guitar work named "Gran Vals" by Spanish musician Francisco Tárrega. The Nokia Tune was originally named "Grande Valse" on Nokia phones but was changed to "Nokia Tune" around 1998 when it became so well known that people referred to it as the "Nokia Tune."

2) The world's first commercial GSM call was made in 1991 in Helsinki over a Nokia-supplied network, by Prime Minister of Finland Harri Holkeri, using a Nokia phone.

3) Nokia is currently the world's largest digital camera manufacturer, as the sales of its camera-equipped mobile phones have exceeded those of any conventional camera manufacturer.

4) The "Special" tone available to users of Nokia phones when receiving SMS (text messages) is actually Morse code for "SMS". Similarly, the "Ascending" SMS tone is Morse code for "Connecting People," Nokia's slogan. The "Standard" SMS tone is Morse code for "M" (Message).

5) The Nokia corporate font (typeface) is the AgfaMonotype Nokia Sans font, originally designed by Eric Spiekermann. Its mobile phone User's Guides Nokia mostly used the Agfa Rotis Sans font.
6) In Asia, the digit 4 never appears in any Nokia handset model number, because 4 is considered unlucky in many parts of Southeast/East Asia.

7) Nokia was listed as the 20th most admirable company worldwide in Fortune's list of 2006 (1st in network communications, 4th non-US company).

8. Unlike other modern day handsets, Nokia phones do not automatically start the call timer when the call is connected, but start it when the call is initiated. (Except for Series 60 based handsets like the Nokia 6600)

9) Nokia is sometimes called aikon (Nokia backwards) by non-Nokia mobile phone users and by mobile software developers, because "aikon" is used in various SDK software packages, including Nokia's own Symbian S60 SDK.

10) The name of the town of Nokia originated from the river which flowed through the town. The river itself, Nokianvirta, was named after the old Finnish word originally meaning sable, later pine marten. A species of this small, black-furred predatory animal was once found in the region, but it is now extinct.


How to Unlock Your Nokia Cell Phone



Typically when you purchase a cell phone, the company that sold you the phone 'locked' the phone before you bought it, so you can only use it on their network. This means that you can't use your phone on any other network, even if you change the SIM (which is an abbreviation for Subscriber Identity Module) card. The SIM card is the little piece of plastic that identifies your phone to the cellular network. Changing your SIM card to have your phone work on another network is useful especially if you want to travel to another country and want to buy a pre-paid SIM card so you can have cell phone access without roaming charges. There are services that offer to provide unlocking capabilities for a fee, but don't pay for them! You can do it yourself for free, which is the perfect price.

Steps


1. Before trying anything else, contact your service provider and ask for an unlock code. Usually, if you've been a customer of theirs for some time, they will provide you with an unlock code for free. This is, by far, the best way to get your phone unlocked.
2. Download software to generate the unlocking code. Software is available on some websites for free and some pay websites that also offer support if things go wrong. See external links below.
3. Find the Serial number of the cell phone, also known as your IMEI number. This can be done by either removing the back of your cell phone and looking underneath the battery, or simply by typing in *#06# into your cell phone. It should be something like: 030057361439976/05429508118
4. Using the software you have downloaded, enter in your Manufacturer (which is in this case Nokia), your model number, and your IMEI number. Also enter your country and the Network. Calculate the code, this may be different depending on which software you are using. If your phone is the Nokia 3390 phone, select the model 3310, they are the same phone.

* #pw+403927744443466+7#

5. Remove the SIM card from your Nokia phone. This is typically done by removing the back cover of the phone and removing the battery and sliding the card out. Put the battery back in and power the phone on.
6. You will see a message "Insert SIM Card". Enter all of the characters you see in your code, including the # symbols. To get a 'p' press * 3 times, to get a '+' press the * key 2 times, to get a 'w' press the * key 4 times. Disregard any spaces in the code.
7. In order to unlock your phone you generally need to enter only one code. Start with the first one. If your phone is not unlocked by typing the first code (MCC+MNC), use code "7" (Multilock)
8. Once you have finished entering a code that works you should see a message that says "SIM is not restricted" or "Restriction off" message depending on your model. If not, try entering another code. Message "Cannot undo restrictions" means the phone is "hard-locked" and cannot be unlocked by code.



Tips


* Unlocking only applies to GSM phones, phones using other cellular technologies, cannot be unlocked without special software and hardware.
* Switch off the phone. Hold the keys "3", "*" and "Call" and switch the phone on. Keep the buttons held down till you see the word "Formatting..." on the screen. Make sure that the battery is full charged before you attempt this. This should reset the phone lock code.



Warnings


* Attempting to unlock your phone is done at your own risk. Although unlocking your phone is legal, some cell phone operators might choose to void your warranty should you unlock your phone (then again, some cell phone operators won't mind).
* Most phones only allow you to try a certain number of unlock tries, Nokia phones have a limit of 5 tries. After that, the phone becomes "hard-locked", meaning it cannot be unlocked without using special equipment.
* Most of the newer phones will not work with the codes generated by the free unlock programs.




Universal Codes For Cell Phones And Advanced Tricks


Nokia Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile Phones

(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( F avourite )

(3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

(4) *#4720# Deactivate Half Rate Codec.

(5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )

(6) *#9999# Phones software version if *#0000# does not work.

(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

(Cool #pw+1234567890+ 1# Provider Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(9) #pw+1234567890+ 2# Network Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(10) #pw+1234567890+ 3# Country Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(11) #pw+1234567890+ 4# SIM Card Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(12) *#147# (vodafone) this lets you know who called you last.

(13) *#1471# Last call (Only vodofone).

(14) *#21# Allows you to check the number that "All Calls" are diverted to

(15) *#2640# Displays security code in use.

(16) *#30# Lets you see the private number.

(17) *#43# Allows you to check the "Call Waiting" status of your phone.

(1Cool *#61# Allows you to check the number that "On No Reply" calls are diverted to.

(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls
are diverted to.

(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.

(21) *#67705646# Removes operator logo on 3310 & 3330.

(22) *#73# Reset phone timers and game scores.

(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

(24) *#7760# Manufactures code.

(25) *#7780# Restore factory settings.

(26) *#8110# Software version for the nokia 8110.

(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favourite )

(2Cool *#94870345123456789 # Deactivate the PWM-Mem.

(29) **21*number# Turn on "All Calls" diverting to the phone number entered.

(30) **61*number# Turn on "No Reply" diverting to the phone number entered.

(31) **67*number# Turn on "On Busy" diverting to the phone number entered.

(32) 12345 This is the default security code.

press and hold # Lets you switch between lines

NOKIA 5110/5120/5130/ 5190 :
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+ 1
Network lock status #pw+1234567890+ 2
Provider lock status: #pw+1234567890+ 3
SimCard lock status: #pw+1234567890+ 4

NOKIA 6110/6120/6130/ 6150/6190 :
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA 3110:
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330:
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625# This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours,
ask your local dealer for it.
Cool Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689#



.:: Ericsson ::.
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
Ericsson T20

MENU tecnichal Info
[type] >*<<*<Displays>*<<**<Network>*<<*<menu>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
<and> are the right and left menu's keys



Ericsson T18s/T10/A1018s:
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
<and> are the right and left menu's keys
!!!><Control>*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration

2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock

3)Text's name List
Info personal : >*<<**<

SIM Locking ( 8 digits' code ) ( it could harm your phone )
1) Network
2) Subnetwork
3) SP
4) Corporate




.:: Siemens ::. :
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1

.:: Bosch ::.
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
.::Alcatel ::.:
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
.:: Samsung ::.
Samsung SGH600/2100DB :
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!) : *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
.:: Dancall ::.
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
.:: Philips ::.:
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.
.:: Panasonic ::.
Panasonic gd90 gd93:
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "
Panasonic gd70:
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "

.:: Acer ::.
Acer V 750:
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable) [ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]

.:: Genie ::.
Genie DB:
*#06# IMEI.
*#2254*# Near Cell Mode.

For every received BTS will be displayed :
Current channel and 2 channel levels

*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.

.:: NEC ::.
NEC db2000 :
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n� 8 cifre]
( it could harm your phone )

.:: Trium ::.
Trium Geo/Geo @ - Astral - Cosmo -Aria

Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage


Trium Galaxy
Push * and type 5806: Production date and SW version
.:: Telit ::.:
Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature
.:: Sagem ::.
Sagem MC959/940 :
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration
Sagem MC920:
Select commands' menu and push *
Displays 5 new menus :

1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )


.:: Sony ::.
Sony CMD Z5/J5:
Vers. SW :
Without SIM , switch on phone and type l *#7353273#
.:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version


.:: Motorola ::.
Motorola V3688:
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK

.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever E-mail customer of the Internet network.

The e-mail will be sent to the maximum of within an hour from the reception.

The sended message will contain in luminosity the telephone number of the sender.

In order for sending e-mail, send an SMS with this syntax (always separated by spaces):

EMA name@domain text-of-your- email

Example: in order to send an email to john@doe.com , do the following:

EMA john@doe.com text-of-your- email

if your phone cant print @ replace it with a !

EMA johon!doe.com text-of-your- email

And then send this message to the folloving number: +39 338 8641732
Free SMS Center numbers
From your telephone you can send SMS messages of 160 char. max. to another GSM phone

Your message will be sent through an SMS Center (usually the one that gave your provider)

You pay a little fee depending of your provider, BUT YOU WILL HAVE TO PAY something

In order for sending SMS without paying anything, you got to change your SMS Center number with these one

+491722270300 or +358405202999 or +352021100003
Codes (that they dont tell you in the manual)
To check the IMEI (International Mobile Equipment Identity) type: *#06#

Information you get from the IMEI:
XX X
TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code).

FAC = Final Assembly Code (For Nokia phones FAC=10).

SNR = Serial Number.

SP = Spare (always SP=0).

To check the phone's software (firmware revision information) type: *#0000# ( or for some phones outher then Nokia 61XX you can try *#model nummber# ex. for 8110 *#8110#)

Information you can get from the phone's software version:
V 3.14
28-11-97
NSE-3

1st line: Software version.
2nd line: The date of the software release.
3nd line: Phone type, .

Some versions and dates:

V 3.14 28/11/97

V4.33 11/03/98

V 4.73 22/04/98

V 5.24 14/9/98
Pin-Out Diagram for the 6110
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND

Revealing Headphone and Car-Kit Menus
Think about this: If you do these tricks the new menus can not be erased after the procedure. But it's not dangerous or harmful for your phone

To enable the headset-function, you have to short-circuit the "3" and "4". After a short time there is "Headset" on the display Now, menu 3-6 is now enabled!

To enable the carkit-function you have to short-circuit the "4" and "5". After a short time, "Car" is shown on the display and the menu 3-7 is enabled!!
This Trick is for you how want to hear more then your supposed to !
If you short-circuit the left and the right contact with the middle contact ("3", "6" and "9") the Nokia Software hangs! The profile "Headset" will be activated. Before you do this, just active the "auto call receive" function in the headphone profile and set the ringing volume to "mute" Now you can use your phone for checking out what people are talking about in a room. Place the phone somewhere stratidic and call your phone! The phone receives the call without ringing and you can listen to what people are talking about! .....gr8...

Serial numbers on your 6110:

For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date 0298
Then there is the last Repair Date: ex. Repaired: 0000

Note: you must turn off the phone to exit after this test, because of the last function, "transfer user data" which doesn't work as "standard"....You can use this mode only to transfer all Calender, Profile and Callers Group Information to another phone (eg. if you are replacing phone or configuring phones for use within your company or when a particular phone doesn't works correctly
Activating and deactivating EFR and HFR, on your 6110
*3370# to activate Enhanced Full Rate - Makes calls sound better, but decreases the battery life by about 5%.

#3370# to deactivate Enhanced Full Rate

*4720# to activate Half Rate Mode - Drops call quality, but increases battery life by about 30%.

#4720# to deactivate Half Rate Mode


Your mobile original or not?

Would like to know your mobile is original or not?!!



Type # 6 0 # *



After you enter the code you will see a new code contain 15 digits:

43 4 5 6 6 1 0 6 7 8 9 4 3 5



IF the digit number Seven & Eight is 02 or 20 that mean it was Assembly on Emirates which is very Bad quality

IF the digit number Seven & Eight is 08 or 80 that mean it[FONT=&quot]�[/FONT]s manufactured in Germany which is not bad

IF the digit number Seven & Eight is 01 or 10 that mean it[FONT=&quot]�[/FONT]s manufactured in Finland which is Good

IF the digit number Seven & Eight is 00 that mean it[FONT=&quot]�[/FONT]s manufactured in France which is the best Mobile Quality ...

Try it..................



Universal Codes For Cell Phones And Advanced Tricks


Nokia Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile Phones

(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( F avourite )

(3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

(4) *#4720# Deactivate Half Rate Codec.

(5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )

(6) *#9999# Phones software version if *#0000# does not work.

(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

(Cool #pw+1234567890+ 1# Provider Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(9) #pw+1234567890+ 2# Network Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(10) #pw+1234567890+ 3# Country Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(11) #pw+1234567890+ 4# SIM Card Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).

(12) *#147# (vodafone) this lets you know who called you last.

(13) *#1471# Last call (Only vodofone).

(14) *#21# Allows you to check the number that "All Calls" are diverted to

(15) *#2640# Displays security code in use.

(16) *#30# Lets you see the private number.

(17) *#43# Allows you to check the "Call Waiting" status of your phone.

(1Cool *#61# Allows you to check the number that "On No Reply" calls are diverted to.

(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls
are diverted to.

(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.

(21) *#67705646# Removes operator logo on 3310 & 3330.

(22) *#73# Reset phone timers and game scores.

(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

(24) *#7760# Manufactures code.

(25) *#7780# Restore factory settings.

(26) *#8110# Software version for the nokia 8110.

(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favourite )

(2Cool *#94870345123456789 # Deactivate the PWM-Mem.

(29) **21*number# Turn on "All Calls" diverting to the phone number entered.

(30) **61*number# Turn on "No Reply" diverting to the phone number entered.

(31) **67*number# Turn on "On Busy" diverting to the phone number entered.

(32) 12345 This is the default security code.

press and hold # Lets you switch between lines

NOKIA 5110/5120/5130/ 5190 :
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+ 1
Network lock status #pw+1234567890+ 2
Provider lock status: #pw+1234567890+ 3
SimCard lock status: #pw+1234567890+ 4

NOKIA 6110/6120/6130/ 6150/6190 :
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA 3110:
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330:
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625# This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours,
ask your local dealer for it.
Cool Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689#



.:: Ericsson ::.
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
Ericsson T20

MENU tecnichal Info
[type] >*<<*<Displays>*<<**<Network>*<<*<menu>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
<and> are the right and left menu's keys



Ericsson T18s/T10/A1018s:
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
<and> are the right and left menu's keys
!!!><Control>*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration

2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock

3)Text's name List
Info personal : >*<<**<

SIM Locking ( 8 digits' code ) ( it could harm your phone )
1) Network
2) Subnetwork
3) SP
4) Corporate




.:: Siemens ::. :
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1

.:: Bosch ::.
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
.::Alcatel ::.:
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
.:: Samsung ::.
Samsung SGH600/2100DB :
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!) : *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
.:: Dancall ::.
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
.:: Philips ::.:
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.
.:: Panasonic ::.
Panasonic gd90 gd93:
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "
Panasonic gd70:
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "

.:: Acer ::.
Acer V 750:
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable) [ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]

.:: Genie ::.
Genie DB:
*#06# IMEI.
*#2254*# Near Cell Mode.

For every received BTS will be displayed :
Current channel and 2 channel levels

*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.

.:: NEC ::.
NEC db2000 :
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n� 8 cifre]
( it could harm your phone )

.:: Trium ::.
Trium Geo/Geo @ - Astral - Cosmo -Aria

Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage


Trium Galaxy
Push * and type 5806: Production date and SW version
.:: Telit ::.:
Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature
.:: Sagem ::.
Sagem MC959/940 :
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration
Sagem MC920:
Select commands' menu and push *
Displays 5 new menus :

1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )


.:: Sony ::.
Sony CMD Z5/J5:
Vers. SW :
Without SIM , switch on phone and type l *#7353273#
.:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version


.:: Motorola ::.
Motorola V3688:
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK

.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever E-mail customer of the Internet network.

The e-mail will be sent to the maximum of within an hour from the reception.

The sended message will contain in luminosity the telephone number of the sender.

In order for sending e-mail, send an SMS with this syntax (always separated by spaces):

EMA name@domain text-of-your- email

Example: in order to send an email to john@doe.com , do the following:

EMA john@doe.com text-of-your- email

if your phone cant print @ replace it with a !

EMA johon!doe.com text-of-your- email

And then send this message to the folloving number: +39 338 8641732
Free SMS Center numbers
From your telephone you can send SMS messages of 160 char. max. to another GSM phone

Your message will be sent through an SMS Center (usually the one that gave your provider)

You pay a little fee depending of your provider, BUT YOU WILL HAVE TO PAY something

In order for sending SMS without paying anything, you got to change your SMS Center number with these one

+491722270300 or +358405202999 or +352021100003
Codes (that they dont tell you in the manual)
To check the IMEI (International Mobile Equipment Identity) type: *#06#

Information you get from the IMEI:
XX X
TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code).

FAC = Final Assembly Code (For Nokia phones FAC=10).

SNR = Serial Number.

SP = Spare (always SP=0).

To check the phone's software (firmware revision information) type: *#0000# ( or for some phones outher then Nokia 61XX you can try *#model nummber# ex. for 8110 *#8110#)

Information you can get from the phone's software version:
V 3.14
28-11-97
NSE-3

1st line: Software version.
2nd line: The date of the software release.
3nd line: Phone type, .

Some versions and dates:

V 3.14 28/11/97

V4.33 11/03/98

V 4.73 22/04/98

V 5.24 14/9/98
Pin-Out Diagram for the 6110
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND

Revealing Headphone and Car-Kit Menus
Think about this: If you do these tricks the new menus can not be erased after the procedure. But it's not dangerous or harmful for your phone

To enable the headset-function, you have to short-circuit the "3" and "4". After a short time there is "Headset" on the display Now, menu 3-6 is now enabled!

To enable the carkit-function you have to short-circuit the "4" and "5". After a short time, "Car" is shown on the display and the menu 3-7 is enabled!!
This Trick is for you how want to hear more then your supposed to !
If you short-circuit the left and the right contact with the middle contact ("3", "6" and "9") the Nokia Software hangs! The profile "Headset" will be activated. Before you do this, just active the "auto call receive" function in the headphone profile and set the ringing volume to "mute" Now you can use your phone for checking out what people are talking about in a room. Place the phone somewhere stratidic and call your phone! The phone receives the call without ringing and you can listen to what people are talking about! .....gr8...

Serial numbers on your 6110:

For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date 0298
Then there is the last Repair Date: ex. Repaired: 0000

Note: you must turn off the phone to exit after this test, because of the last function, "transfer user data" which doesn't work as "standard"....You can use this mode only to transfer all Calender, Profile and Callers Group Information to another phone (eg. if you are replacing phone or configuring phones for use within your company or when a particular phone doesn't works correctly
Activating and deactivating EFR and HFR, on your 6110
*3370# to activate Enhanced Full Rate - Makes calls sound better, but decreases the battery life by about 5%.

#3370# to deactivate Enhanced Full Rate

*4720# to activate Half Rate Mode - Drops call quality, but increases battery life by about 30%.

#4720# to deactivate Half Rate Mode


Free GPRS on ur Airtel Mobiles

Objective: To get free GPRS connection on your PC/mobile.

What u need: GPRS-enabled Mobile (with AIRTEL connection only), PC, connecting cable or USB dongle or infrared device.

Procedure:

1. Activate AIRTEL LIVE on your mobile, which is provided FREE by AIRTEL (thanks them).

2. Create 2 GPRS data acountss and select first as active profile. (Go to settings, then connection, then gprs settings).

3. Now, connect your mobile to the PC.

4. Install the driver for your mobile[FONT=&quot]�[/FONT]s modem. (you can download it from your handset company's website).

5. Create a new dial-up connection as follows:

New connection wizard, then

Connecting Device : Your mobile[FONT=&quot]�[/FONT]s modem

ISP Name : ___ (anything you like)

Phone Number : *99***2# or *99***1#

Username and Password : ___

6. Do followng settings: Use the proxy 100.1.200.99 and port 8080.

7. Connect to the dial-up account. The whole world is at your fingertips.

Conclusion: Nothing is impossible. Your free GPRS connection is ready now.


Check The Quality Of Your Mobile



Press the following on your mobile *#06#. The-international mobile equipment identity number appears


IF the digit number Seven & Eight is 02 or 20 that mean it was assembled in the Emirates which is very Bad quality

IF the digit number Seven & Eight is 08 or 80 that mean s it was manufactured in Germany which is not bad

IF the digit number Seven & Eight is 01 or 10 that mean it's manufactured in Finland which is Good

IF the digit number Seven & Eight is 00 that means it was manufactured in original factory which is the best Mobile Quality ....

IF the digit number Seven & Eight is 13 that means it was assembled in Azerbaijan which is very poor quality and potentially very dangerous to your health!!!


Replies are invited as an encouragement for further postings . .



Why the Future is in Your Hands ???



Sales of smartphones are expected to overtake those of laptops in the next 12 to 18 months as the mobile phone completes its transition from voice communications device to multimedia computer.

Convergence has been the Holy Grail for mobile phone makers, software and hardware partners, as well as consumers, for more than a decade.

And for the first time the rhetoric of companies like Nokia, Samsung and Motorola, who have boasted of putting a multimedia computer in your pocket, no longer seems far fetched.

"Converged devices are always with you and always connected," said Olli-Pekka Kallasvuo, Nokia chief executive at last week's Mobile World Congress in Barcelona.

Last year Nokia sold almost 200m camera phones and about 146m music phones, making it the world's biggest seller of digital cameras and MP3 players.

In the coming year the firm predicts it will sell 35 million GPS-enabled phones as personal navigation becomes the latest feature to be assimilated into the mobile phone.



Form and function


Nigel Clifford, chief executive of Symbian, said: "All of those single use devices - MP3 players, digital camera, GPS - are collapsing onto the phone."

"We are going past the point where this was a phone with a few other things," he said.

Symbian's operating system shipped on 188 million phones last year and a third of those came with GPS.

"We see mobile phones evolving into multi-functional devices that now support consumer electronics, multimedia entertainment and mobile professional enterprise applications; all converging," said Luis Pineda, from mobile phone chip firm Qualcomm.


More and more people are snapping shots with a handset
Convergence is being driven by a combination of software, services and hardware.





The first phones powered by a chip running at 1Ghz will hit the market later this year, seven years after the first desktop chip broke th e gigahertz barrier.


Qualcomm's 1Ghz Snapdragon chipset will debut inside a number of handsets, including some from Samsung and HTC

"It's a first in the industry for a wireless chipset," said Mr Pineda.

As well as raw horsepower Snapdragon also features a dedicated application processor, as well as the ability to handle 12 megapixel digital photos and up to 720p high definition video imaging.

Mr Clifford from Symbian said the mobile industry had to deliver multi-function devices which did not compromise.

He said: "When we look at what is collapsing on to these devices and people's expectations with their experiences on single-use specialized devices there is going to be rising expectations."

Chip shop

More than 90% of the world's mobile phones are powered by technology created by British firm Arm. It designs chip architectures that it licenses to semiconductors makers such as Qualcomm and Broadcom.

Ian Drew from Arm said future mobile phones demanded ever more processing power.

But building chips with greater processing was not a straightforward, he said.

The future of the internet and computing applications is not going to be in the home or at the office; it's going to be mobile

Nigel Clifford, Symbian


"If you look at a typical phone the first thing you have got to do is get within the half a watt envelope.

"It needs to get into your pocket. And there's no fan. It needs to work for days rather than hours."

He added: "When you start adding multi media experiences - such as 3D graphics, video, and games - there are two ways to do that: you can get bigger and bigger processors or you have multi core where you can switch off a processor when you don't need it."

Arm is demonstrating a chip architecture, called Coretex A9, that will offer four cores, or processors, on a single chip.

Symbian has been working with Arm on future uses for multi-core mobile phones.

"You can use massive amounts of processing if you need it. But if you don't you can power down the cores that aren't required," said Mr Clifford.

Symmetrical Multi Processing will drive the next generation of applications on a phone, he added.

"Silicon vendors are looking very seriously at how they integrate SMP."

Mr Clifford added: "The future of the internet and computing applications is not going to be in the home or at the office; it's going to be mobile."


The gaming abilities of handsets are rapidly improving
He said gaming would be the next feature to collapse into phones.

"That is one of the next single usage devices that will start feeling the pressure from the mobile device," he said.

3D graphics acceleration is becoming standard on many of today's mobile phones and specialists like Nvidia have joined the market.

Mr Clifford said today's most powerful mobile phones, such as Nokia's N96 and NTTDoCoMo's 905 series have the same power as a laptop from 2000.

Nvidia's APX 2500 chip has enough 3D graphics acceleration to handle Quake 3, a PC game from 1999, on a mobile phone.

Handset owners were also beginning to expect the same online experience they have on their desktop PCs on their mobile phones.

"Web 2.0, social networking and video sharing; that's a real driver of horsepower," said Mr Drew from Arm.

He added: "But you need to be able to get data in. The next generation of mobile phones need high performance radios - they will have high data rates that will enable this content to be streamed to you."

Symbian is working on technology called Freeway to give phones the ability to move seamlessly between wireless networks, like wi-fi and cell networks like 3G and 4G.

"We don't want people to feel the mobile web is a second class experience."



Now, virus pre-installed in gadgets

From iPods to navigation systems, some of today's hottest gadgets are landing on store shelves with some unwanted extras from the factory [FONT=&quot]�[/FONT] pre-installed viruses that steal passwords, open doors for hackers and make computers spew spam.

Computer users have been warned for years about virus threats from downloading internet porn and opening suspicious email attachments. Now they run the risk of picking up a digital infection just by plugging a new gizmo into their PCs.

Recent cases to be reviewed include some of the most widely used tech devices: Apple iPods, digital picture frames sold by Target and Best Buy stores and TomTom navigation gear. In most cases, Chinese factories [FONT=&quot]�[/FONT] where many companies have turned to keep prices low [FONT=&quot]�[/FONT] are the source.

So far, the virus problem appears to come from lax quality control [FONT=&quot]�[/FONT] perhaps a careless worker plugging an infected music player into a factory computer used for testing [FONT=&quot]�[/FONT] rather than organized sabotage by hackers or the Chinese factories.

It's the digital equivalent of the recent series of tainted products traced to China, including toxic toothpaste, poisonous pet food and toy trains coated in lead paint. But sloppiness is the simplest explanation, not the only one.

If a virus is introduced at an earlier stage of production, by a corrupt employee or a hacker when software is uploaded to the gadget, then the problems could be far more serious and widespread.

Knowing how many devices have been sold, or tracking the viruses with any precision, is impossible because of the secrecy kept by electronics makers and the companies they hire to build their products. But given the nature of mass manufacturing, the numbers could be huge.

"It's like the old cockroach thing [FONT=&quot]�[/FONT] you flip the lights on in the kitchen and they run away," said Marcus Sachs, a former White House cybersecurity official who now runs the security research group SANS Internet Storm Center. "You think you've got just one cockroach? There's probably thousands more of those little boogers that you can't see."


Virus & your Mobile

What is a mobile phone virus?


A mobile phone virus or mobile malware - malicious mobile software - is a computer virus specifically adapted for the mobile phone environment and designed to spread from one vulnerable phone to another.

A virus is a program code that replicates by being copied to another program. Viruses can be transmitted as attachments to an email or in a download file. Some viruses take effect as soon as their code is executed; other viruses can lie dormant. A virus that replicates by resending itself as an email attachment or as a part of a network message is known as a worm.

Viruses can range from benign to quite harmful; they can erase data from the infected phone or send fake messages purporting to be from the phones owner. How prevalent are mobile phone viruses? The current security risk from mobile phone viruses and worms is low.

Until many more smart phones or PDAs are in use, and users of these phones are regularly exchanging executable files, the risk will remain low. The mobile industry takes the threat of viruses very seriously and is continually monitoring its networks and working to protect users from any future risk from mobile phone viruses. There are also some simple measures that individual users can implement to protect themselves.

What can I do to protect my phone?

The following tips can help prevent problems with viruses on your phone:

1. Switch to Bluetooth hidden mode. If your phone has Bluetooth capability, ensure that the Bluetooth capability is switched to hidden or invisible mode unless you specifically need it to be visible. This will help prevent other Bluetooth-enabled devices from finding your phone (unless you grant them the necessary permission) and will therefore help protect your phone from worms that spread using the Bluetooth wireless technology.

2. Exercise caution before opening attachments. When accepting applications sent via Bluetooth, or opening MMS attachments, exercise caution, just as you would when opening an email attachment on your PC, because they may include harmful software. Ensure the application or attachment comes from a known source, and is wary of opening files that have unfamiliar text attached to them, even if they come from someone you know.

3. Only download content from a trusted source. Trusted sources may include operator portals and other well-known brands that offer adequate protection against viruses and other harmful software. Be aware though that, as with emails, malicious or fraudulent users may be able to fake the appearance of a trusted source.

4. Consider anti-virus software. Some software is available to prevent phone viruses. You may wish to consider downloading this software.

5. Contact your phone manufacturer if concerned. If you think you have a virus, call the phone manufacturer’s care line. They can assist you confirm if it is a virus, and help fix the problem.

How to disable a STOLEN mobile phone?

A really wonderful tip .

Now, if only everyone followed it.

To check your Mobile phone[FONT=&quot]�[/FONT]s serial number, key in the following digits on your phone:

*#06#

A 15 digit code will appear on the screen. This number is unique to your handset. Write it down and keep it somewhere safe. when your phone get stolen, you can phone your service provider and give them this code.They will then be able to block your handset so even if the thief changes the SIM card, your phone will be totally useless.

You probably won[FONT=&quot]�[/FONT]t get your phone back, but at least you know that whoever stole it can[FONT=&quot]�[/FONT]t use/sell it either. If everybody does this, there would be no point in people stealing mobile phones.



 
Top