harman03
:)
Avid launches the new M-Audio BX D2 series monitors, including the BX8 D2 and BX5 D2 both with a new look and improved sound.
These models from the best-selling line deliver a listening experience that’s true to the source, helping musicians, producers, and video editors create mixes that translate well across listening systems.
Both are equipped with Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters to provide rich, defined bass and smooth, clear highs.
The BX8 D2 sports an 8-inch woofer and 130 watts of distributed power and the BX5 D2 packs 5-inch woofer and features 70 watts of distributed power. They have optimized rear port, offering extended low-frequency response.
The BX5 D2 and BX8 D2 are available for $400 and $600, respectively.
Avid M-Audio BX8 D2 Specifcations:
These models from the best-selling line deliver a listening experience that’s true to the source, helping musicians, producers, and video editors create mixes that translate well across listening systems.
Both are equipped with Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters to provide rich, defined bass and smooth, clear highs.
The BX8 D2 sports an 8-inch woofer and 130 watts of distributed power and the BX5 D2 packs 5-inch woofer and features 70 watts of distributed power. They have optimized rear port, offering extended low-frequency response.
The BX5 D2 and BX8 D2 are available for $400 and $600, respectively.
Avid M-Audio BX8 D2 Specifcations:
- Frequency Response: 38Hz – 22 kHz
- Crossover Frequency: 2.2 kHz
- Low-Frequency Amplifier Power: 70 watts
- High-Frequency Amplifier Power: 60 watts
- Maximum Signal-To-Noise (Dynamic Range): > 100 dB (typical A-weighted)
- Polarity: positive signal at + input produce outward LF cone displacement
- Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced
- Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
- Power: factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
- Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
- Cabinet: vinyl-laminated MDF
- Size: 12” x 10” x 15”; 30.48cm x 25.4cm x 38.1cm
- Weight: 26.4 lbs./unit; 11.97 kg
- Frequency Response: 53 Hz – 22 kHz
- Crossover Frequency: 3 kHz
- Low-Frequency Amplifier Power: 40 watts
- High-Frequency Amplifier Power: 30 watts
- Maximum Signal-To-Noise (Dynamic Range): > 100 dB (typical A-weighted)
- Polarity: positive signal at + input produce outward LF cone displacement
- Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced
- Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
- Power: factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
- Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
- Cabinet: vinyl-laminated MDF
- Size: 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm