Configure- TP-Link 8816 ADSL to Mtnl Delhi

ANybody can help me out here.

How to configure TP-Link 8816 ADSL2+ Modem router with MTNL Delhi Broadband+Phone?

Office ch ohna bannda aaya si , ohde ton taan nahi hoya , mai nahi siga othe unn maine aap nu configure karna paina , ehde ch iIP and mac address kede kede paune etc etc details de sakda koi syaana?
 
Eh taan ho gaya paaji but oh jede Internet di settings hundi hai jiddan , DYnamic IP use karna ya Static ya PPPoA/PPPoE.

Ohde ch IP Adress keda pauna jeda MTNL da net fadd lave. Oh saariyan details chahidi sigiyan
 

Android

Prime VIP
Staff member
For Ethernet, the router can be used in DHCP or STATIC LAN configuration.

It is recommended to use the DHCP mode which will allow the machine to procure its network settings from the Dlink router.

If the STATIC mode is chosen then enter the following details in the network configuration of the PC:
IP Address: 192.168.1.2
Gateway: 192.168.1.1
Netmask: 255.255.255.0
DNS Server: 192.168.1.1
 

Jus

Filhaal..
MTNL :hassa

I didn't get the issue properly. But as you have explained, it seems that you've configured the first-time router settings correctly, and now you need to configure internet settings on your operating system. If it were so, go ahead with Static IP address settings as follows:

IP address: 192.168.1.24
Subnet Mask: 255.255.0.0
Default Gateway: 192.168.1.1

Preferred DNS Server: 59.179.243.70
Alternate DNS Server: 203.94.243.70

Thereafter, to see the connectivity, do the ping test. If you're using windows, open run command box and type ping 59.179.243.70 -t and press enter.

If it doesn't work, check initial router settings.
 

Similar threads

Top